In this guide, we will explore troubleshooting steps for resolving the error light on the Epson TM U220 receipt printer.
Troubleshooting Power and Reset Methods
-
Check power connection:
- Make sure the power cord is securely plugged into an outlet
- Ensure the power switch is turned on
-
Reset the printer:
- Turn off the printer
- Unplug the power cord
- Wait for 5 minutes
- Plug the power cord back in
- Turn on the printer
Addressing Paper and Printhead Issues
If you are experiencing paper and printhead issues with your Epson TM U220 printer, there are a few troubleshooting steps you can take to resolve the error light. First, check the paper path for any obstructions or jams. Clear any paper jams carefully to ensure smooth printing. Next, inspect the printhead for any debris or damage.
Clean the printhead with a lint-free cloth and alcohol solution if necessary. Ensure that the paper is loaded correctly and is compatible with the printer. Adjust the paper settings in the printer driver if needed. If the issue persists, consider contacting Epson customer support for further assistance.
Clearing Jams in Paper and Autocutter
- Turn off the printer and unplug it from the power source.
- Ensure that the printer is powered off before attempting to clear any jams.
- Unplugging the printer will prevent any accidents while clearing the jam.
- Open the printer cover and remove any jammed paper.
- Carefully open the printer cover to expose the paper path.
- Remove any jammed paper by gently pulling it in the direction of the paper path.
- Check the autocutter area for any obstructions.
- Inspect the autocutter area for any debris or obstructions that may be causing the jam.
- Remove any obstructions carefully to prevent damage to the autocutter mechanism.
- Close the printer cover and plug the printer back in.
- Once the jam has been cleared, close the printer cover securely.
- Plug the printer back into the power source and turn it on to resume printing.
Sensor Malfunctions and Maintenance Needs
| Issue | Cause | Solution |
|---|---|---|
| Sensor not detecting paper | Dirty sensor or misaligned sensor | Clean sensor with a soft cloth or adjust sensor alignment |
| Sensor detecting paper when there is none | Dirty or faulty sensor | Clean sensor or replace faulty sensor |
| Sensor not detecting printer cover closed | Loose or faulty sensor | Tighten sensor or replace faulty sensor |
| Sensor detecting printer cover closed when it is open | Dirty or misaligned sensor | Clean sensor or adjust sensor alignment |
Frequently Asked Questions
Why is my Epson receipt printer error flashing?
Your Epson receipt printer error is flashing because the roll paper cover may not be correctly closed or the roll paper may not be correctly installed.
How to reset Epson U220 printer?
To reset an Epson U220 printer, you can turn off the printer and then press and hold the reset button on the back while turning it back on. After about 5 seconds, a warning will print out.
How to solve Epson printer red light blinking?
To solve Epson printer red light blinking, first remove any jammed paper and press the cancel button. If the issue persists, check for any product errors by turning the printer off, removing any obstructions inside, and then turning it back on. If the error persists, contact Epson for further support.
