Skip to content
Home » Windows 10 Cannot Open BIOS Fix

Windows 10 Cannot Open BIOS Fix

Having trouble opening BIOS on Windows 10? Here’s how to fix it.

Understanding BIOS and Its Functions

BIOS, or Basic Input/Output System, is a crucial component of your computer’s motherboard that initializes hardware components and boots up the operating system. To access the BIOS on a Windows 10 system, you need to restart your computer and press a specific function key, usually F2, F10, or Del, during the boot-up process.

Within the BIOS, you can adjust settings related to hardware components, such as the hard drive, memory, and CPU. It also allows you to configure boot order, change system date and time, and perform other system maintenance tasks.

If your Windows 10 system cannot open the BIOS, try restarting your computer and repeatedly pressing the designated function key. If that doesn’t work, you may need to check your motherboard manual for the correct key or update your BIOS firmware.

Understanding BIOS and its functions can help you troubleshoot issues with your computer’s hardware and software. By accessing the BIOS, you can make necessary adjustments to get your system up and running smoothly.

Solutions for Access Issues

  • Turn off the computer and unplug all cables
  • Open the computer case and check for any loose connections
  • Re-seat the RAM, GPU, and other components
  • Plug everything back in and turn on the computer to check if the issue is resolved

Solution 2: Reset BIOS Settings

  • Turn off the computer and unplug all cables
  • Open the computer case and locate the CMOS battery
  • Remove the CMOS battery for a few minutes
  • Re-insert the CMOS battery and close the computer case
  • Turn on the computer and enter the BIOS to check if the issue is resolved

Solution 3: Update BIOS

  • Visit the manufacturer’s website and download the latest BIOS update
  • Follow the instructions to update the BIOS
  • Restart the computer and check if the issue is resolved

Resetting CMOS by Removing BIOS Battery

If your Windows 10 computer is unable to open the BIOS, you may need to reset the CMOS by removing the BIOS battery. This process can help resolve issues related to the BIOS settings and configurations.

1. Power off your computer and disconnect all cables.

2. Open the computer case to locate the BIOS battery on the motherboard.

3. Carefully remove the BIOS battery from its slot.

4. Wait for a few minutes before reinserting the BIOS battery back into place.

5. Close the computer case and reconnect all cables.

6. Power on your computer and check if you can now access the BIOS without any issues.

Using UEFI Firmware Settings

To access UEFI firmware settings to fix the issue of Windows 10 not opening BIOS, follow these steps:

1. Restart your computer and continuously press a specific key (usually Del, F2, F12, or Esc) to enter the UEFI firmware settings.

2. Once in the UEFI settings, locate the “Boot” tab and navigate to the “Boot Priority” or “Boot Order” section.

3. Ensure that your hard disk drive with Windows 10 installed is set as the first boot device to prioritize it over other devices.

4. Save your changes and exit the UEFI firmware settings to reboot your computer and see if Windows 10 now opens without any issues.

Following these steps should help you resolve the problem of Windows 10 not opening BIOS by utilizing the UEFI firmware settings effectively.

Troubleshooting PC Boot Problems

If your Windows 10 PC is unable to open the BIOS, there are a few troubleshooting steps you can try to resolve the issue. Firstly, ensure that your computer is properly connected to a power source and that the power cord is securely plugged in.

Check your keyboard connection to make sure it is properly connected to your PC. Sometimes, a faulty keyboard connection can prevent you from accessing the BIOS.

If you are using a laptop, try connecting an external keyboard to see if that helps.

Restart your computer and repeatedly press the correct key (usually Del, F2, or F12) to access the BIOS. If that doesn’t work, you may need to reset your BIOS settings to default.

If you are still unable to access the BIOS, you may need to consult a professional for further assistance.


How do I fix my BIOS problem?

To fix your BIOS problem, you can reset the BIOS to factory defaults by tapping the F2 key during startup, selecting the option to reset, and then saving the changes before exiting the BIOS setup screen. This should resolve any issues you are experiencing.

Why won’t my PC boot to Windows goes to BIOS?

My PC won’t boot to Windows and goes to BIOS likely due to factors such as pressing the boot key, outdated BIOS, improperly plugged-in OS drive, misconfigured boot sequence, or a CMOS battery problem.

How do I force Windows 10 to open the BIOS?

To force Windows 10 to open the BIOS, you can access the BIOS through the Start button. Click on the Start button, then the power icon, and hold Shift while clicking “Restart.” Another option is to search for “Change Advanced Startup Options” in the search bar and hit Enter.

Was this article helpful?