Encountering the Blue Screen 0x0000001E error can be frustrating and disruptive to your computer usage. In this article, I will guide you through effective solutions to fix this issue and restore your system’s stability.
Back to normal system
If you are experiencing the Blue Screen 0x0000001E Error on your computer, follow these steps to fix the issue.
1. Reboot your computer: Sometimes, a simple reboot can resolve the error. Press the Windows key, click on the Power button, and select Restart.
2. Start in Safe Mode: If the error persists, try starting your computer in Safe Mode. Press the Windows key, type “msconfig” in the search bar, and press Enter. In the System Configuration window, go to the Boot tab and check the “Safe boot” option. Click Apply and then OK. Restart your computer to enter Safe Mode.
3. Update device drivers: Outdated or incompatible device drivers can cause the Blue Screen error. Press the Windows key, type “Device Manager” in the search bar, and press Enter. Expand the categories and look for any devices with a yellow exclamation mark. Right-click on the device and select “Update driver.” Follow the on-screen instructions to update the driver.
4. Scan for malware: A computer virus can also trigger the Blue Screen error. Run a full scan using your antivirus software, such as Microsoft Defender Antivirus. If any threats are detected, follow the recommended actions to remove them.
5. Check for Windows updates: Microsoft regularly releases patches and updates to fix system issues. Press the Windows key, type “Windows Update” in the search bar, and press Enter. Click on “Check for updates” and install any available updates.
6. Uninstall recently installed software: If you recently installed any third-party software, it might be causing conflicts. Press the Windows key, type “Control Panel” in the search bar, and press Enter. Go to “Programs” and click on “Uninstall a program.” Select the recently installed software and click on “Uninstall.” Follow the on-screen instructions to complete the uninstallation.
Check your RAM
1. First, make sure your computer is turned off and disconnected from any power source.
2. Open your computer’s case to access the RAM modules. This process may vary depending on your computer’s make and model, so consult the manufacturer’s instructions if needed.
3. Once you have access to the RAM modules, carefully remove them from their slots. Take note of the order and orientation of the modules, as you will need to reinstall them in the same way.
4. Inspect the RAM modules for any visible damage or debris. Clean the gold contacts with a soft, lint-free cloth to ensure a good connection.
5. Next, reseat the RAM modules by firmly but gently pushing them back into their slots. Make sure they are securely in place.
6. Close your computer’s case and reconnect any power sources.
7. Turn on your computer and check if the Blue Screen error still occurs. If it does, you may need to test your RAM using specialized software.
8. Download and install a reliable RAM testing tool such as Memtest86 or Windows Memory Diagnostic.
9. Run the RAM testing tool and follow the instructions provided. This will help identify any errors or issues with your RAM.
10. If the RAM test reveals any problems, you may need to replace the faulty RAM module. Contact your computer’s manufacturer or a reputable computer repair service for assistance with this process.
Roll-back your driver
To roll back your driver and fix the Blue Screen 0x0000001E error, follow these steps:
1. Open the Control Panel in Windows by pressing the Windows key + X and selecting “Control Panel” from the menu.
2. In the Control Panel, click on “Device Manager” to open it.
3. In Device Manager, locate the device driver that you want to roll back. This could be the driver for your graphics card, network adapter, or any other device that may be causing the error.
4. Right-click on the device driver and select “Properties” from the context menu.
5. In the Properties window, go to the “Driver” tab.
6. Click on the “Roll Back Driver” button. If the button is grayed out, it means that there is no previous driver to roll back to.
7. A confirmation window will appear, asking if you want to roll back the driver. Click “Yes” to proceed.
8. Wait for the driver rollback process to complete. This may take a few moments.
9. Once the rollback is finished, restart your computer.
10. After the restart, check if the Blue Screen 0x0000001E error still persists. If the error is gone, it means that the driver rollback was successful.
Remember to update your drivers regularly to ensure optimal performance and stability. If the error continues to occur after rolling back the driver, you may need to consider other troubleshooting steps or seek further assistance.
Update your driver
1. Open the Control Panel by right-clicking on the Start menu and selecting it from the context menu.
2. In the Control Panel, click on “Device Manager” to open it.
3. Look for the device category that is causing the error, such as “Display Adapters” for graphics card issues.
4. Expand the category by clicking on the arrow next to it.
5. Right-click on the specific device that is causing the error and select “Update Driver” from the context menu.
6. Choose the option to automatically search for updated driver software.
7. Windows will search for the latest driver online and install it if available.
8. If Windows couldn’t find an updated driver, you can try visiting the manufacturer’s website to manually download the latest driver for your device.
9. Once the driver update is complete, restart your computer to apply the changes.
10. After the reboot, check if the Blue Screen error still persists.
Uninstall the newly installed software
1. Open the Control Panel on your Windows 10 operating system. You can do this by clicking on the Start menu and typing “Control Panel” in the search bar.
2. In the Control Panel, locate the “Programs” or “Programs and Features” option and click on it.
3. A list of all the installed programs on your computer will appear. Scroll through the list and find the software that you recently installed and suspect to be causing the error.
4. Once you have identified the software, click on it to select it.
5. Look for the “Uninstall” or “Remove” option. This may be located at the top of the list or in the toolbar. Click on it.
6. A pop-up window may appear asking for confirmation to uninstall the software. Confirm the uninstallation by clicking “Yes” or “Uninstall”.
7. Follow any additional prompts or instructions that may appear during the uninstallation process. This may include selecting the reason for uninstalling or confirming any settings.
8. Once the uninstallation is complete, restart your computer. This allows any remaining files or settings related to the software to be removed from your system.
9. After the computer restarts, check if the Blue Screen 0x0000001E Error still persists. If the error is resolved, it confirms that the newly installed software was causing the issue.
Repair system files
Step 1: Access the Control Panel in Windows by clicking on the Start menu and typing “Control Panel” in the search bar. Open the Control Panel from the search results.
Step 2: In the Control Panel, search for “Recovery” and click on the “Recovery” option.
Step 3: Under the “Advanced recovery tools” section, click on “Open System Restore”.
Step 4: A new window will open. Select the recommended restore point or choose a specific restore point that you think will help resolve the error. Click “Next” to proceed.
Step 5: Follow the on-screen instructions to complete the system restore process. This will restore your computer to a previous state when it was functioning properly.
Step 6: Once the system restore is complete, restart your computer and check if the Blue Screen error is resolved.
If the error persists, you may need to run a virus scan using your antivirus software such as Microsoft Defender Antivirus. This will help detect and remove any potential malware that could be causing the error.
Additionally, make sure your Windows operating system is up to date with the latest patches and updates. You can do this by going to the Settings menu, selecting “Update & Security”, and clicking on “Check for updates”.
If the error still persists after following these steps, you may need to seek further assistance from a computer technician or refer to a more detailed tutorial specific to your computer’s make and model.
Clear any existed viruses
To clear any existing viruses that may be causing the Blue Screen 0x0000001E error, follow these steps:
1. Open the Control Panel by pressing the Windows key and typing “Control Panel” in the search bar. Press Enter to open it.
2. In the Control Panel, select “Uninstall a program” under the “Programs” category.
3. Look for any unfamiliar or suspicious programs that you don’t recognize. These could be potential sources of the virus. Right-click on them and select “Uninstall” to remove them from your system.
4. Restart your computer in Safe Mode. To do this, press the Windows key + R to open the Run dialog box. Type “msconfig” and press Enter. In the System Configuration window, go to the “Boot” tab and check the “Safe boot” box. Click OK and restart your computer.
5. In Safe Mode, open your preferred antivirus software and perform a full system scan. Follow any prompts or instructions given by the antivirus software to remove the detected viruses.
6. After the scan is complete, restart your computer in normal mode.
7. Check if the Blue Screen 0x0000001E error still persists. If it does, try updating your drivers. Press the Windows key + X and select “Device Manager” from the menu. Expand the categories and locate any devices with a yellow triangle icon. Right-click on them and select “Update driver.” Follow the on-screen instructions to update the drivers.
8. If updating the drivers doesn’t resolve the issue, you may need to perform a system restore to a previous point when your computer was functioning correctly. Press the Windows key + R, type “rstrui” and press Enter. Follow the prompts to restore your system to a previous state.
9. Finally, make sure your Windows operating system is up to date. Press the Windows key + I to open the Settings menu. Select “Update & Security” and click on “Check for updates.” Install any available updates for your system.
Disable/Uninstall antivirus software
To disable or uninstall antivirus software on your Windows 10 computer, follow these steps:
1. Open the Control Panel by pressing the Windows key + X, then selecting “Control Panel” from the menu that appears.
2. In the Control Panel, navigate to the “Programs” or “Programs and Features” section.
3. Look for your antivirus software in the list of installed programs and select it.
4. Click on the “Uninstall” or “Change” button, which should be located at the top of the program list.
5. Follow the on-screen prompts to complete the uninstallation process. You may be asked to confirm your decision or provide an administrator password.
6. Once the antivirus software is uninstalled, restart your computer to ensure that any leftover files or processes are fully removed.
Note: Disabling or uninstalling your antivirus software can leave your computer vulnerable to potential threats. Only disable or uninstall your antivirus software if you are troubleshooting a specific issue and plan to re-enable or reinstall it afterwards.
If you encounter any issues or errors during the uninstallation process, you can visit the official website of your antivirus software for specific uninstallation instructions or seek help from their support team.
Restore from a restore point
To restore your computer from a restore point and fix the Blue Screen 0x0000001E error, follow these steps:
1. Open the Control Panel in Windows by clicking on the Start menu and selecting Control Panel.
2. In the Control Panel, search for “Recovery” and click on the “Recovery” option.
3. In the Recovery window, click on the “Open System Restore” link.
4. A System Restore window will open. Click on the “Next” button to proceed.
5. You will see a list of available restore points. Choose a restore point that was created before you started experiencing the Blue Screen error.
6. Click on the “Next” button and then click on “Finish” to start the restoration process.
7. Your computer will restart and begin restoring to the selected restore point. This may take some time, so be patient.
8. Once the restoration is complete, your computer will restart again. Check if the Blue Screen error has been resolved.
Reset or reinstall Windows
Before proceeding with the reset or reinstallation process, it’s important to back up any important files and data to ensure they’re not lost during the process.
To reset Windows, follow these steps:
1. Open the Start menu and go to the Settings option.
2. In the Settings menu, select Update & Security.
3. From the left sidebar, choose Recovery.
4. Under the Reset this PC section, click on the Get started button.
5. You’ll be presented with two options: Keep my files or Remove everything. Choose the option that suits your needs.
6. Follow the on-screen instructions to complete the reset process.
If resetting Windows doesn’t resolve the Blue Screen 0x0000001E Error, you may need to reinstall Windows. Here’s how:
1. Insert the installation media (e.g., USB or DVD) containing the Windows installation files into your computer.
2. Restart your computer and boot from the installation media.
3. Follow the on-screen instructions to start the Windows installation process.
4. When prompted, choose your language preferences and click Next.
5. Click on the Install now button.
6. Follow the instructions to enter your product key, if required.
7. Select your preferred Windows edition and agree to the terms and conditions.
8. In the installation type screen, choose the Custom option.
9. Select the partition where you want to install Windows and click Next.
10. Follow the on-screen instructions to complete the installation process.
Remember to reinstall any necessary drivers, software, and updates after reinstalling Windows to ensure your computer runs smoothly.
Resetting or reinstalling Windows can help resolve the Blue Screen 0x0000001E Error by fixing any software-related issues that may be causing the error.
